Stepwell Disinfecting Mat Sales Brochure
The StepWell mat provides an all-in-one solution for safely sanitizing shoes. It features a 2' x 3' well that holds an abrasive insert and your preferred liquid sanitizer or disinfectant, followed by a 3' x 5' carpeted section to help remove any excess moisture from shoes, reducing the likelihood of slips following sanitation. Wash, wipe, and walk on safely!
- Available in three designs
- The insert serves as a splash guard and helps dislodge any dirt or debris from the bottom of shoes so the fluid can reach the entire sole surface.
- Each mat includes one insert; additional inserts are available in packs of four
- Well holds one insert and approximately 84 ounces (2.5 L) of sanitizing solution (not included)
- Compatible with most sanitizing/disinfecting solutions. Works best with quaternary and hydrogen peroxide sanitizing solutions. See Installation Instructions for details on recommended dilutions.
Ideal for use in food processing, healthcare and childcare facilities, or any area where increased protection from germs is important.
StepWell mats require the use of a sanitizing solution (not included). The StepWell mat works best with quaternary and hydrogen peroxide sanitizing solutions; can be used with chlorine bleach solutions, but failure to adhere to recommended concentrate can damage the mat.
Sizes: Mat 3' x 7' (35" X 82") Insert 20.5" x 33"
Disinfectants to Use:
The StepWell mat works best with quaternary and hydrogen peroxide sanitizing solutions; can be used with chlorine bleach solutions, but failure to adhere to recommended concentrate can damage the mat.
Quaternary ammonium should be used per recommended dilution instructions on the label (for sanitizing level protection). • 3% hydrogen peroxide solutions can be used without further dilution. • 6% chlorine bleach should be used at a concentration of 0.4% (0.5 oz. per gallon). Caution: Do not use mat as a work surface to prepare bleach solution, as undiluted bleach may cause permanent color loss
Specifications:
SURFACE
Material: Type 6,6 nylon (printed/acid-dyed)
Weight: 32 ounces/yard2
Construction: Cut pile
Substrate: Freudenberg Lutradur polyester spunbound non-woven fabric (3.8 ounces/yard2)
BACKING
Material: Nitrile rubber (smooth)
Thickness: 65-mil (body thickness); 107-mil (carpet border thickness); 130-mil (well border thickness)
WELL
Depth: 1/4 inch (0.25")
Fluid Volume: 84.5 ounces (2.5 L) with insert
INSERT
Material: PET (polyethylene terephthalate) printed/acid-dyed
Weight: 30 ounces/yard2
Construction: Needle-punched
OVERALL MAT THICKNESS: 3/8" (0.375")
Cleaning Instructions:
The life of your insert will depend greatly on the amount of foot traffic your mat receives. The insert should be replaced at your discretion, but we recommend replacing it when it begins to show signs of wear.
For the well and insert, we recommend weekly cleaning. Simply wipe the well down or hose off and allow to dry.
The insert can be rinsed in a sink or hosed off.
The carpeted portion of the mat can be cleaned in several different ways:
- Vacuum regularly (daily in high-traffic areas; weekly in lower-traffic applications)
- Clean with an extractor. Hang to dry.
- Hose off. Hang to dry.